nmap
Nmap 又叫做Network Mapper(網絡映射器)是一個開源并且為了Linux系統管理員或者網絡管理員的萬能的工具。Nmap用于瀏覽網絡，執行安全掃描，網絡審計以及在遠程機器找到開放端口。它可以掃描在線主機，操作系統，濾包器和遠程主機打開的端口。（來源）

創新互聯服務項目包括沙坡頭網站建設、沙坡頭網站制作、沙坡頭網頁制作以及沙坡頭網絡營銷策劃等。多年來，我們專注于互聯網行業，利用自身積累的技術優勢、行業經驗、深度合作伙伴關系等，向廣大中小型企業、政府機構等提供互聯網行業的解決方案，沙坡頭網站推廣取得了明顯的社會效益與經濟效益。目前，我們服務的客戶以成都為中心已經輻射到沙坡頭省份的部分城市，未來相信會繼續擴大服務區域并繼續獲得客戶的支持與信任！--

安裝:

yum install nmap

1. 使用Hostname和IP地址來掃描系統，掃描出他的系統所有開放端口，服務和MAC地址。

    [root@ssqs-test1 ~]# nmap baidu.com
    
    Starting Nmap 5.51 ( http://nmap.org ) at 2018-06-12 17:34 CST
    Nmap scan report for baidu.com (123.125.115.110)
    Host is up (0.0026s latency).
    Other addresses for baidu.com (not scanned): 220.181.57.216
    Not shown: 998 filtered ports
    PORT    STATE SERVICE
    80/tcp  open  http
    443/tcp open  https
    
    Nmap done: 1 IP address (1 host up) scanned in 4.02 seconds
   
    [root@ssqs-test1 ~]# nmap 47.92.65.98
   
    Starting Nmap 5.51 ( http://nmap.org ) at 2018-06-12 17:34 CST
    Nmap scan report for 47.92.65.98
    Host is up (0.0070s latency).
    Not shown: 996 filtered ports
    PORT     STATE  SERVICE
    22/tcp   open   ssh
    80/tcp   closed http
    443/tcp  closed https
    3389/tcp closed ms-term-serv
    
    Nmap done: 1 IP address (1 host up) scanned in 4.54 seconds

2. 使用 “-v” 選項，此選項給了更多的遠程設備的細節。

    [root@ssqs-test1 ~]# nmap -v 47.92.65.98
   
    Starting Nmap 5.51 ( http://nmap.org ) at 2018-06-12 17:36 CST
    Initiating Ping Scan at 17:36
    Scanning 47.92.65.98 [4 ports]
    Completed Ping Scan at 17:36, 0.01s elapsed (1 total hosts)
    Initiating Parallel DNS resolution of 1 host. at 17:36
    Completed Parallel DNS resolution of 1 host. at 17:36, 0.02s elapsed
    Initiating SYN Stealth Scan at 17:36
    Scanning 47.92.65.98 [1000 ports]
    Discovered open port 22/tcp on 47.92.65.98
    Completed SYN Stealth Scan at 17:36, 4.04s elapsed (1000 total ports)
    Nmap scan report for 47.92.65.98
    Host is up (0.0070s latency).
    Not shown: 996 filtered ports
    PORT     STATE  SERVICE
    22/tcp   open   ssh
    80/tcp   closed http
    443/tcp  closed https
    3389/tcp closed ms-term-serv
    
    Read data files from: /usr/share/nmap
    Nmap done: 1 IP address (1 host up) scanned in 4.13 seconds
    Raw packets sent: 1996 (87.800KB) | Rcvd: 9 (480B)

3. 掃描特定的端口，Nmap有多種多樣的選項去發現遠程機器的端口。通過“-p”選項，你可以指定你想要掃描的端口，默認情況下Nmap掃描只掃描TCP端口。可掃描單個或者多個，用逗號分隔。

    [root@ssqs-test1 ~]# nmap 47.92.65.98 -p 5672
   
    Starting Nmap 5.51 ( http://nmap.org ) at 2018-06-12 17:40 CST
    Nmap scan report for 47.92.65.98
    Host is up (0.0065s latency).
    PORT     STATE SERVICE
    5672/tcp open  amqp
    
    Nmap done: 1 IP address (1 host up) scanned in 0.10 seconds
   
    [root@ssqs-test1 ~]# nmap 47.92.65.98 -p 5672,15672
   
    Starting Nmap 5.51 ( http://nmap.org ) at 2018-06-12 17:40 CST
    Nmap scan report for 47.92.65.98
    Host is up (0.0064s latency).
    PORT      STATE SERVICE
    5672/tcp  open  amqp
    15672/tcp open  unknown
    
    Nmap done: 1 IP address (1 host up) scanned in 0.13 seconds

Linux基本命令不能用解決方法

--

先執行如下命令：

export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin  

然后在當前命令界面，基本命令都已經可用，繼續如下操作

vim /etc/profile
source /etc/profile

/etc/sysconfig/iptables文件不存在

--

在虛擬機上裝的centos7是最小安裝方式，所以許多東西都沒裝，需要自己手動安裝。
因此/etc/sysconfig/iptables不存在，沒有安裝iptables防火墻
可以通過以下命令安裝iptables防火墻

systemctl stop firewalld

systemctl mask firewalld

// 安裝
yum install iptables-services

// 查看狀態
service iptables status

//設置開機啟動
systemctl enable iptables

//管理
systemctl stop iptables  

systemctl start iptables  

systemctl restart iptables  

service iptables save

名稱欄目：每日記載內容總結46-創新互聯
文章起源：http://m.jcarcd.cn/article/cesdhj.html